你現在的位置:首頁-產品中心-AUTEM公司產品 -PLC分析儀 
 
 
AUTEM公司產品-PLC分析儀
 
PLC-ANALYZER pro 5
 

 
Logic analysis, failure diagnosis, Data acquisition and facilitiy optimization for PLC systems
 
Fields of application

 • Failure diagnosis in PLC systems
 • Detecting and localizing of sporadic errors
 • Analysis and optimization / cycle time reduction
 • Long-term recording of measured values
 • Documentation + support of QA, TPM/OEE
 • Development / Construction
 • Installation
 • Maintenance

 
PLC-ANALYZER pro 5 is a software system for logic analysis and acquisition of recorded data on PLC-controlled facilities. Acquisition, representation, and evaluation of PLC signals such as inputs, outputs, flags, data words, etc. is now very easy.

Online display makes possible observation of the signal waveform in real time. In addition to long-term recording, trigger conditions can be specified for the acquisition of particular events. This allows rarely occurring sporadic errors to be recorded for later analysis.

In contrast to traditional logic analyzers, the PLC-ANALYZER pro 5 has the decisive advantage of recording process data through standardized PLC interfaces. The program e. g. supports MPI/PPI, PROFIBUS and TCP/IP Ethernet for SIMATIC S7 or the programming unit interface for SIMATIC S5. A computer that is connected for the purpose of programming the PLC can be used for recording process data without hardware modifications. The tiresome process of hooking up monitoring cables is now a thing of the past.

 
Signals can also be recorded from different PLCs at the same time.
 
Cycle-precise recording is attractive because of the complete acquisition of measured values in each PLC cycle. By using the measurement interface AD_USB-Box external voltage and current signals, which are not available in the PLC, can also be recorded. Project files make it possible to automate frequently recurring acquisition sessions for various facilities.
 
PLC-ANALYZER pro 5 is an indispensable tool for PLC software development, construction, installation, maintenance and training.
 
 
 
 
 
 
 
 
 
 
 
 
Order data
  Ethernet Interface: 1 x RJ45, 10 / 100 Mbps
  Transport Protocols: TCP/IP,
ISO on TCP (RFC1006),
TCP/IP with PLC Header,
ISO (H1)
  Applications Protocols S7 Protokoll,
S5-AP,
Modbus on TCP,
Send / Receive (Raw/ Socket)
  Serial Interfaces: 1 up to 5 serial interfaces;
Basic device without interface modules
  Serial Protocols AS511 (S5-PG),
3964(R), RK512,
Modbus RTU,
MPI, PPI,
NITP / K-Sequence
Telnet,
optional:
ABC (IPC 620 PLCs)
  Power Supply: 24 V DC, ca. 1,1 A
  Dimensions[in mm]: L = 110, D = 120, H = 120
    Order Numbers:
echolink echolink basic 200-6500-01
Adapter for S7-300 rail mounting 700-5600-01
Serial protocol for IPC PLCs 200-6560-01
Interface modules for echolink basic MPI 200-6580-01
MPI 2 port 200-6580-02
RS232 200-6581-01
TTY (20 mA) 200-6582-01
RS422 floating 200-6583-01
RS485 floating 200-6585-01
Connector power pack 24 V DC Version EURO 700-5596-01
Version UK 700-5596-02
Version USA 700-5596-03
 
 
西門子公司產品
·西門子S5PLC可編程控制器
·西門子S7PLC可編程控制器

INAT公司產品
·通信軟體和驅動程式

·培訓資訊

·S5PLC可編程控制器通信系統
·通信協定轉換器
·工業級PC操作面板
·網路元件
 

AUTEM公司產品
·PLC-ANALYZER pro 5
·BLACKBOX 2 for PLC-ANALYZER pro 5
·PROFIBUS -Tester V3
·sioCHECK 3

設為首頁 | 收藏本站 | 聯繫方式
滬ICP備05056914號 Copyright @ 2005-2006 版權所有 傑思電子有限公司 技術支援:上海網設